Tador KX-T927-MTL, Инструкция по эксплуатации

Страница: 5 / 12

5
4.
Dial Symbols
) Hash # ) 2 *
Pause 5 *
) Asterisk * ) 3 *
In the two push button, and four button Tador Doorphone Model KX-T927-AV-2P/4P,
to program the push button from 1 - 9 use the cell consecutively from 41 - 49
5.
Settings relay strike time
for the first relay – (default 3 seconds).
Example: change the relay strike time to 5 seconds
Enter remote programming mode, enter the cell number 02, followed by the new
time that you want to set 05 two digits, and then press (#) Hash key to approve.
6.
Conversion time
– programming the maximum time allowed for conversation
when start conversion between the Doorphone unit to PBX extension (default 60 Enter
remote programming mode, enter cell number 11, followed by the new time that you
want to set 90 (two digits), and then press Hash (#) key to approve.
7.
Number of Rings to Answer
– This programming section sets the number of
rings that the
Tador Doorphone
will allow to pass through the system before it picks up
the call. Cell number 12, (default one ring).
Example:
Change the number of ring to answer to 3 rings.
Enter remote programming mode, Enter cell number 12, followed by the new
amount of rings you want to set 03(two digits), and then press Hash (#) key to
Exit Programming mode Approval New time Cell number programming Programming code
##(Hash) # 55 52 ## Call Doorphone
Exit Programming mode Approval New time Cell number programming Programming code
##(Hash) # 95
11
## Call Doorphone
Exit Programming mode Approval New value Cell number programming Programming code
##(Hash) # 53
11
## Call Doorphone
41
42
43
44