9
INSPECTION PRIOR TO INSTALLATION
After carefully opening the carton, unpack and inspect your TADIRAN AIROW 1
TM
.
Check the following:
LOCATION OF THE TADIRAN AIROW 1
TM
This section provides instructions on where to locate the TADIRAN AIROW 1
TM
within an HVAC indoor unit.
No Damage to the TADIRAN AIROW 1
TM
Box
No Damage to the TADIRAN AIROW 1
TM
Device and Accessories
IMPORTANT!
Air Flow Direction
- an arrow on the TADIRAN AIROW 1
TM
device indicates the
correct air direction. Ensure the device is oriented according to the arrow’s
direction.
Installation Location
- The TADIRAN AIROW 1
TM
is installed inside the indoor
air conditioning unit.
• Installation Direction
- The device is to be installed either in the return
air side, the air supply, or in the indoor unit between the filter and the coil
where the air flows through the TADIRAN AIROW 1
TM
device in the arrow
direction.
• Environmental Conditions
- To assure proper operation, verify that the
temperature surrounding the device is within -5°C to +55°C and relative
humidity is kept within 20% to 90%,
non-condensing
.
• Device Footprint
– The footprint of the device is 13.6x10.4x7.5cm.
• Clearance
- Allow 5-centimeter clearance for air inlet and outlet at both
devices’ openings. Ensure the surface area of installation is free of dust,
cables, and any other interference.
• Air Flow Velocity
- To assure proper operation, verify the air velocity
through the device will be 1.6 m/Sec or above.
SAFETY HAZARD!
Disconnect the air conditioner and the TADIRAN AIROW 1
TM
from the main
supply before performing the installation or before servicing the device.
