Tadano GR-700N, Руководство по обслуживанию

Страница: 12 / 200

iii
2. Boom clearance adjustment .................... 48
2.1 Shim adjustment at lower oblique sides
of the boom bottom ............................ 49
2.2 Shim adjustment at upper part
of the boom bottom ............................ 49
2.3 Shim adjustment at sides
of the boom bottom ............................ 50
2.4 Slide plate adjustment at lower part
of the boom head ............................... 51
2.5 Clearance adjustment at upper part
of the boom head ............................... 52
2.6 Shim adjustment at upper part
of the boom bottom ............................ 53
2.7 Clearance check at upper part
of the boom bottom ............................ 53
2.8 Clearance check at sides
of the boom bottom ............................ 54
3. Installing and adjusting anti-buckling bolts
for telescoping cylinders .............. 54
4. Bubble level adjustment .......................... 55
4.1 Leveling the slewing table plane .............. 55
4.2 Upper and lower bubble level
adjustment .......................................... 57
4.3 Adjustment check ..................................... 57
4.4 Readjustment ........................................... 57
Y-7 Assembly Adjustment
(Traveling Device) .................. 58
1. Service brake adjustment ....................... 58
1.1 Adjusting the brake pedal ......................... 58
1.2 Tightening the cap of reserve tank
of service brake fluid .......................... 58
1.3 Check after replacing brake hose ............ 59
2. Accelerator adjustment ........................... 59
2.1 Accelerator pedal ..................................... 59
2.2 Accelerator sensor assembly
and adjustment ................................... 60
2.3 Engine speed ........................................... 62
2.4 Procedure for checking engine stall
speed .................................................. 62
3. Parking brake adjustment ........................ 63
3.1 Adjusting the clearance
(between brake shoe and drum) ......... 63
3.2 Connecting parking brake
and spring chamber ............................ 63
4. Tire and steering angle adjustment ......... 63
4.1 Tire size and air pressure ......................... 63
4.2 Adjusting the steering angle...................... 63
5. Torque converter and transmission ......... 64
5.1 Maximum allowable speed........................ 64
5.2 Adding oil to the torque converter
and transmission ................................. 64
6. Braking force ........................................... 65
6.1 Parking brake force ................................... 65
6.2 Service brake force ................................... 65
6.3 Auxiliary operating brake (aux. brake)
force .................................................... 65
7. Adjusting headlight light axis ................... 66
7.1 Adjusting low beam ................................... 66
7.2 Adjusting high beam ................................. 66
7.3 Procedure for adjusting light axis .............. 66
8. Hydraulic suspension .............................. 67
8.1 Releasing pressure in the accumulators
for hydraulic suspension ..................... 67
9. Retightening the hub nuts ....................... 67
10. Fuel air bleeding procedure ..................... 67
11. Axle alignment adjustment procedure ..... 68
11.1 Align the axle center with frame center ..... 68
11.2 Align each axle using 1st axle
as datum axle ..................................... 69
12. Wheel alignment adjustment procedure .. 70
12.1 Work preparation ...................................... 70
12.2 Front wheel adjustment ............................. 71
12.3 Rear wheel adjustment ............................. 71
12.4 Checking procedure .................................. 71
12.5 After checking ........................................... 71