Tadano ATF 130G-5, Перевод оригинального руководства по эксплуатации

Страница: 105 / 636

3.5.3 Entering the operating conditions
DANGER
Incorrect or incomplete entries of operating conditions in the automatic
safe load indicator!
Incorrect or incomplete entries of operating conditions in the automatic
safe load indicator can lead to accidents. The mobile crane can reach
an unstable area and tilt. This could be fatal.
1. Enter the operating conditions have been correctly and completely
on the basis of the lifting capacity chart,
2. Check the operating conditions before the crane operation.
Basic functions of the automatic safe load indicator are:
▪ Calculating the load conditions in the crane operation,
▪ Transferring the information to the crane driver and
▪ Stopping the crane movement as soon as an overload is detected.
Before starting the crane operation, the corresponding operating state must be saved correctly in
the automatic safe load indicator.
In this system, the crane driver must enter the following operating conditions:
▪ State of the right and left outriggers,
▪ State of the counterweight,
▪ State of the boom or the luffing fly jib and
▪ Number of rope falls.
Operating conditions can be entered only if the boom is retracted com‐
pletely.
Entering the outrigger conditions
In the normal state of the ASLI display, press <Right outrigger> or <Left outrigger> to
switch to the mode for entering the outrigger state.
The display of the LCD field changes as follows:
3 Operation
ATF 130G-5 2146097
2014-09
105