AffloVest will start in the medium intensity mode by default. Pressing the following buttons will update the
treatment whether AffloVest is running or not:
HIGH
Intensity
MEDIUM
Intensity
LOW
Intensity
While treatment is running, AffloVest may be paused by pressing the
(Pause/Play) button. This shall suspend treatment until the
(Pause/Play) button is pressed again. While the system is paused, press
and hold
(Pause/Play) button for two (2) seconds to reset the
treatment duration to the previous setting.
Highlighted (Boxes 1–4) indicate active treatment zone.
Highlighted (Perc, Vib, Drain) indicate the current active program.
Menu Navigation
Press the (Up) and (Down) buttons to navigate through the menus
on the controller. To change the values, press the (Left) and (Right)
buttons while the values are highlighted.
To navigate to the “Program Menu” or “Usage Menu”, navigate to the
desired menu selection, press the
(Play/Pause) button to navigate to
that menu.
Program Menu
To modify the default GO settings, navigate to the Program Menu.
Modify the settings as desired within the following allowable ranges:
– Treatment Type: Percussion, Vibration, Drainage.
– Treatment Time: 5–15 minutes.
– Treatment Intensity: Low, Medium, High.
Select “Save” and press the
(Play/Pause) button to save the
settings. To exit without saving select “Cancel” and press the
(Play/Pause) button.
The next time the
GO
button is pressed from the Main Menu the new
treatment settings will be run.
Usage Menu
To view the run time information, navigate to the Usage Menu
Press the
(Play/Pause) button to return to the Main Menu.
5
