Tactile Medical Actitouch, Руководство пользователя

Страница: 24 / 36

22
Problem Possible Cause Corrective Action
The control unit
will not operate
in Intermittent
Pneumatic
Compression
Mode .
1. The control unit has not been
securely inserted into the
Compression Sleeve.
2. The Power Adapter/Charger
is not securely connected to
the charging port and an AC
power outlet.
3. The control unit has not been
switched on.
4. The event log needs to be
reset.
5. Device fault.
1.
Refer to Section 5.4.2 Inserting the Control
Unit into the Compression Sleeve.
2. Ensure the Power Adapter/Charger is
securely connected to the charging
port and power supply. A green light
will illuminate on the Power Adapter/
Charger if it is correctly connected to an
AC power outlet.
3. Switch the control unit on. Refer to
Section 5.7.1 To Activate Intermittent
Pneumatic Compression Mode from
Sustained Compression Mode Operation
and Section 5.7.2 To Activate Intermittent
Pneumatic Compression Mode from Off.
4. Remove the control unit from the
Compression Sleeve. Reset the device
by pressing and holding the MUTE
button for ten (10) seconds. The LCD
will flash “–––” to indicate a successful
event log reset, and the unit will switch
off. The control unit may now be
reinserted into the Compression Sleeve
and used as normal.
5. Please call customer service at
(toll-free) 866.435.3948.*
The Compression
Sleeve appears to
be leaking air . 1. The control unit has not been
securely inserted into the
Compression Sleeve.
2. Device fault.
1. Refer to Section 5.4.2 Inserting the Control
Unit into the Compression Sleeve.
2. If sleeve is damaged, call customer
service at (toll-free) 866.435.3948* for
replacement.
The device is
frequently
“locking out .” 1. The event log needs to be
reset.
2. Multiple “lockouts” may be a
device fault.
1. Remove the control unit from the
Compression Sleeve. Reset the device
by pressing and holding the MUTE
button for ten (10) seconds. The LCD
will flash “–––” to indicate a successful
event log reset, and the unit will switch
off. The control unit may now be
reinserted into the Compression Sleeve
and used as normal.
2. Please call customer service at (toll-free)
866.435.3948.*
* Customer service can be contacted at 866 .435 .3948 (toll-free) between 7:00 am – 7:00 pm CT,
Monday through Friday .