tells you that you have made an improper entry. To hear the buzz, press any
computer key except [fl] [f3] or [f5].
Since the operation is the same for each frequency band, we will use the VHF
menu in the remainder of the discussion (for UHF radios, read UHF In place of
VHF). After you have selected the desired frequency band by depressing either
[flj or [f3], the screen will display the following menu:
TAC 310 SX VHF
PRESS FUNCTION KEY:
1 TO INITIALIZE
3 TO LOAD PGM'D EPROM
The next keystrokes you make will depend on what you want to do - create an
EPROM from "scratch", read an existing EPROM, or use an existing EPROM as a
starting point for making changes in the frequency list.
STARTING OVER
RIJN
You can always return to the main menu like this: Press [ ,-Tnp ], type [RUN],
then press [RETURN].
THE FREQUENCY LIST
INITIALIZE
If all of the frequencies are new, you can create a new EPROM by using the
"initialize" feature. It starts with sixteen unused (N/A) channels In the fre
quency list. You can then edit each channel from N/A to the desired frequency.
1. To begin, press function key [fl]. Ttie screen will blank for a few seconds,
and then display:
LOADING
"^2. After a few seconds, the display will switch to the frequency menu:
TAC 310 SX VHF
CH#
TX(MHZ)
RX(MHZ)
1
N/A
N/A
2
N/A
N/A
3
N/A
N/A
4
N/A
N/A
5
N/A
N/A
6
N/A
N/A
7
N/A
N/A
8
N/A
N/A
9
N/A
N/A
10
N/A
N/A
11
N/A
N/A
12
N/A
N/A
13
N/A
N/A
14
N/A
N/A
15
N/A
N/A
16
N/A
N/A
PRESS FUNCTION KEY:
1 TO EDIT
3 TO PROGRAM
5 WHEN FINISHED
-10-
