Tacony Baby Lock Gallant Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 58

Tacony Baby Lock Gallant Скачать руководство пользователя страница 44

44 |

www.BabyLock.com

Lights

Set the intensity of the lights.

If necessary press the Plus and Minus keys simultaneously to take you
to the Menu screen.

Press the Plus or Minus key to toggle to the Lights option. Press the
Needle Up/Down key to select.

Press the Plus or Minus key to increase or decrease the light intensity
as desired.

Press the Needle Up/Down key to save the setting and exit to the

Menu screen.

Over-speed Alarm

The over-speed alarm sounds when you are moving the machine faster than the stitch regulation encoders

can track.

Turn Over-speed Alarm on or off.

If necessary press the Plus and Minus keys simultaneously to take you to
the Menu screen.

Press the Plus or Minus key to toggle to the Alarm option. Press Needle
Up/Down to select.

Press the Plus or Minus key to select over-speed alarm on or off.

When the alarm is ON, the alarm will sound letting you know you are
moving the machine faster than the stitch regulation encoders can
track. This may result in longer than desired stitches. The remedy is to

slow down your movement.

When the alarm is OFF, the alarm will not sound regardless of how fast

you move the machine.

Press the Needle Up/Down key to save the setting and return to the

Menu screen.

«
...
42
43
44
45
46
...
»

Содержание Baby Lock Gallant



























































Отзывы:

Нет отзывов