A.2
Saving/loading
To save data, a USB stick with the FAT or FAT32 file
system should be used.
Personnel:
n
Heating and sanitary technician
1.
Open
‘System’ .
2.
Open
‘Save/load’ .
3.
Activate
‘Reset factory settings’ .
Personnel:
n
Heating and sanitary technician
Material:
n
USB stick
1.
Insert a USB stick with the parameter file.
2.
Open
‘System’ .
3.
Open
‘Save/load’ .
4.
Select
‘Load settings from USB’ .
Personnel:
n
Heating and sanitary technician
Material:
n
USB stick
1.
Insert a USB stick.
2.
Open
‘System’ .
3.
Open
‘Save/load’ .
4.
Activate
‘Save settings to USB’ .
The data are saved in a format that can only be read
using special software. The data can, however, be
loaded directly onto other controllers.
The software features a range of predefined parameters that can be
continuously recorded. This function must be activated for recording
to be performed.
Personnel:
n
Heating and sanitary technician
1.
Open
‘System’ .
2.
Open
‘Save/load’ .
Resetting to factory setting
Loading a new parameter set
Saving a parameter set externally.
Activating trend recording
H3000 E
Appendix for service personnel
01/2023
Item no. 215251
EA no. EA-1291
Operating instructions
49