GS-312/GS-314 / 7
When trolling with a center rigger, you can troll
it far away from the boat and away from all
other outrigger lines. In most applications, the
center rigger mount should be set at the highest
vertical position and should be the farthest
line away from the boat. With more lines in the
water, the higher the chances to cover a wider
area – thus pulling more baits or lures better
stimulates a school of fish.
A center rigger can accommodate only one line.
Center rigger poles 8' to 12' are ideal for boats
up to 35'. Our carbon fiber center rigger can be
used on boats up to 50'.
Similar to an outrigger, when a fish strikes your
bait or lure, the release clip opens and allows
your fishing line to come free of the center
rigger line so you can reel in the fish.
How to use
How to clean
Mild dish washing liquid, specialty marine cleaners:
Sea Safe Boat Wash, Boat Wash Concentrate
and Super Suds.
Safe Lubricants:
CRC Corrosion Inhibitor, Corrosion Block
and Get Some Extreme.
Bleach
(Clorox, etc.)
and mild abrasive cleaners:
Ajax, Comet, Soft Scrub, Rubbing Compounds, etc.
Strong cleaners:
Such as Muriatic, naval jelly or aluminum acid.
Always use a mild, non-abrasive soap and lots of fresh water. Thoroughly wash the aluminum with a soft
towel or sponge – utilizing lots of soap and water to remove all dried salt crystals and other contaminants.
Rinse completely with direct water pressure. It is recommended to use a small amount of marine-grade
lubricant where the center rigger arm comes out of the base. This will keep the seals lubricated.
Safe Cleaners
Harmful Cleaners
GS-312/314
