2 / GS-312/GS-314
Grand Slam mount
312 or 314
GS-312: 5/16" -18 TPI x 3-1/2"
GS-314: 5/16" -18 TPI x 5-1/2"
• Prepare for installation by ensuring the mounting
surface is clean of any grease and/or dirt.
• Ensure your Canvas T-Top, Arch or Hardtop is
suitably constructed to provide a strong mounting
surface area for your center rigger base.
NOTE:
The maximum hardtop thickness allowable
for GS-312 is 2" and for the GS-314 is 4".
• The center rigger has no lever to turn, as it is
intended only for up and down vertical movement.
• Turning the crank assembly handle will allow the
center rigger to adjust to the desired height.
Handy Tips
Stainless-steel button head cap bolts
Aluminum backing plate
5/16" nyloc hex nuts
5/16" stainless-steel washers
1
4
4
8
1
Included for extra strength
and recommended when
mounting on a hardtop
®
Kit Contents
