Accessories
Polishing wheels:
Use to polish work-pieces made of metal and plastic. Use one of the provided mandrels
to assemble.
Diamond bits:
For fine detail work, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic,
glass, hardened steel, semi precious stones and other hard materials. Bits are covered with diamond
particles.
Grinding stones:
Use for surface treatment of metal parts, cast-metal parts, welding seams and for the
removal of rust. Different shapes are available.
Cutting-off wheels:
Use to cut work-pieces made of metal, plastic, wood or stone. Use one of the provided
mandrels to assemble. The cutting-off wheel only cuts with the outer edge.
Dressing Stone:
Use for cleaning and whetting grinding stones, if their surface has become irregular or dirty.
Drum Band:
Use to grind or smooth workpieces made of wood or glass fiber material. Use with the provided
grinding drum.
Mandrels:
Shafts with screw or threaded head, which are designed for retaining grinding and polishing
wheels.
Drill bits:
Use for drilling holes in work-pieces made of plastic, wood or metal.
Cleaning, maintenance
Always pull out the mains power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
• Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into
the device.
Maintenance
There are no parts inside the equipment which require additional maintenance.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice
- 06 -