Tach-It Mini-Con, Руководство по эксплуатации

Страница: 5 / 12

5
Figure #2
SECTION #4 LOADING OF LABELS:
Note: In order to ensure consistent label placement unto the product,
during the Label Loading process, the labels must be straight and the same
distant from the body of the Main Label Head throughout the entire Label
Feeding Path. Many of the Rollers that are along the Label Feed Path
have Spring Collars which should be used to assist in keeping the labels
straight.
See Figure 3
1) Locate the Label-Hanger Inside (A-1-1) and the Label Hanger Outside (A-1-2) The difference between the 2 is
that the Label Hander Inside (A-1-1) uses a Set Screw to lock it into place while the Label Hanger Outside (A-1-
2) uses an adjustable Black Knob.
2) Keeping in mind the note above and Figure #4, secure the label Hanger Inside onto the shaft and tighten with an
allen screw. Put the roll of labels unto the shaft so that the labels feed off the bottom of the roll as per Figure 4
Figure #3
Figure #4
A-10 Tension Roller
Label Path