SECTION 5 – USING THE MACHINE IN AUTOMATIC MODE
1)
LOAD THE TAPE AND TURN THE MACHINE ON AS DONE IN SECTION 2
2)
PRESS THE MODE BUTTON (SEE FIGURE 3) UNTIL THE INDICATOR LIGHT FOR
AUTO IS LIT AND A PIECE OF TAPE WILL BE DISPENSED TO THE SETTING
OF THE DISPLAY (SEE FIGURE 3)
3)
USING THE REWIND TAPE BUTTON AND THE TAPE FEED BUTTON (SEE FIGURE 3),
CHANGE THE NUMBER IN THE DISPLAY TO EQUAL THE LENGTH OF TAPE DESIRED.
PLEASE NOTE THIS NUMBER IN IS MILLIMETERS AND THAT THERE ARE 25.4
MILLIMETERS TO AN INCH.
4)
REMOVE THE PIECE OF TAPE THAT HAS BEEN DISPENSED AND THE LENGTH OF TAPE
SET ON THE DISPLAY WILL AUTOMATICALLY BE FED.
5)
CONTINUE WORKING AND THE SAME LENGTH OF TAPE WILL BE FED EACH TIME THE
PREVIOUS ON HAS BEEN REMOVED.
SECTION 6 – REMOVING THE TAPE FROM THE MACHINE
1)
REMOVE ANY CUT PIECES OF TAPE
2)
PRESS THE REWIND TAPE BUTTON (SEE FIGURE 3) UNTIL THE TAPE IS REMOVED FROM
THE
FEED
WHEELS.
3)
REMOVE THE SPOOLS FROM THE TAPE SPOOL MANDREL AND THE MODEL 6250 IS
READY FOR ANOTHER TAPE.
SECTION 4 – USING THE MACHINE IN SEMI-AUTOMATIC MODE
1)
LOAD THE TAPE AND TURN THE MACHINE ON AS DONE IN SECTION 2
2)
PRESS THE MODE BUTTON (SEE FIGURE 3) AND THE INDICATOR LIGHTS FOR
MANUAL AND AUTO WILL BE LIT AND A PIECE OF TAPE WILL BE DISPENSED TO THE
SETTING OF THE DISPLAY (SEE FIGURE 3)
3)
USING THE REWIND TAPE BUTTON AND THE TAPE FEED BUTTON (SEE FIGURE 3),
CHANGE THE NUMBER IN THE DISPLAY TO EQUAL THE LENGTH OF TAPE DESIRED.
PLEASE NOTE THIS NUMBER IN IS MILLIMETERS AND THAT THERE ARE 25.4
MILLIMETERS TO AN INCH.
4)
REMOVE THE PIECE OF TAPE THAT HAS BEEN DISPENSED AND PRESS THE CUT BUT
TON AND THE LENGTH OF SET ON THE DISPLAY WILL AUTOMATICALLY BE FED.
5)
TO CONTINUE WORKING PRESS THE CUT BUTTON AND THE SAME LENGTH OF TAPE
WILL BE FED EACH TIME.
