TAC Xenta 511, Руководство пользователя

Страница: 16 / 20

2 TAC Xenta 511 TAC Xenta® 511 and 911 Handbook
16 (42) TAC AB, Feb 2005
0-004-7870-2 (EN)
• Domain name
• Host name
4
Change root password (immediately or later, using passwd ).
5
“Do you want to restart the IP interface?”
• yes will make the changes effective immediately
• no will make the changes effective after the next 511 restart.
6
Exit by typing lo (log out) and pressing Enter.
2.3.4 Connecting a PC to the TAC Xenta 511 via a LAN
1
Connect the Xenta 511 to a LAN according to the figure below.
2
Connect the PC to the same network and start the PC HTML
browser (for example Internet Explorer).
3
Enter the IP address for the Xenta . (e.g. http://172.20.4.21).
4
Log in as root and use the valid password. This should get you to
the Welcome page of the Xenta 511.
5
Select the required item under the System Configuration header
to configure the unit (next section).
2.3.5 Application System Configuration
1
In the web browser : Enter the remaining system parameters.
Fig. 2.5: Connecting the TAC Xenta 511 to a Local Area Network
10 Mbps patch
UTP or STP cable
MMC
A RS232 B 10Base-T
LAN
LAN = Local Area Network
UTP = Unshielded Twisted Pair
STP = Shielded Twisted Pair