2 (4)
Svenska – English
0FL-3971-003, 2002-06-28
4
(SE):
Anslut till LAN och förbered konfigurering
1 Anslut 511-enheten till LAN enligt figuren.
2 Anslut PC till samma nät och starta HTML-
läsaren (t ex Internet Explorer) i PC.
3 I HTML-läsaren: mata in
enhetens IP-adress
.
(Ex.: http://172.20.4.21.)
4 Logga in som
root
och med gällande lösenord.
Härvid skall du få upp 511-enhetens startsida på
skärmen.
5 Välj önskad åtgärd under rubriken
System Con-
figuration
för att konfigurera enheten (ruta 5 nedan).
(GB):
Connect to LAN and prepare Configuration
1 Connect the unit 511 to LAN according to the figure.
2 Connect the PC to the same network and start the
PC HTML Browser (for example Internet Explorer).
3 Use the HTML Browser to set the
IP address of the
unit
. (Ex.: http://172.20.4.21.)
4 Log in as
root
and use the valid password. This
should get you to the Welcome page of the 511 unit.
5 Select the required item under the
System Configu-
ration
header to configure the unit (box 5 below).
LAN = Local Area Network
UTP = Unshielded Twisted Pair (oskärmad, partvinnad)
STP = Shielded Twisted Pair (skärmad, partvinnad)
5
(SE):
Systemkonfigurering
1
Webbläsare:
Mata in övriga systemparametrar.
2 Bestäm LonWorksstrategi:
Bindningsverktyg:
Använd LNS verktyg (ex
LonMaker4Windows).
Ej bindningsverktyg:
Använd TAC Vista.
3. Skapa applikationsprogram med TAC XBuilder.
(GB):
System Configuration
1
Web browser:
Enter the remaining system parameters.
2 Decide on a LonWorks strategy:
Variable binding:
use a LNS Tool
(i e LonMaker4Windows).
Non variable binding:
Use TAC Vista.
3. Create application programs with TAC XBuilder.
10 Mbps 'rak'/patch
UTP alt. STP cable
MMC
A RS232 B
10Base-T
LAN
(SE):
LonTalk Adapter för TAC Vista
1 Installera programmet
LTA for TAC Vista
i samma
katalog som TAC Vista (t ex TAC 330).
2 Starta programmet
LTA for TAC Vista
.
• Markera ett
TACLON interface
•
ADD
• Skriv in
IP adress
för avsedd TAC Xenta 511
• Välj
Port
(default 1068)
•
UPDATE
•
EXIT
3 Anslut till TAC Xenta 511.
4 Välj
LDV Server Port
(default 1068) under
Konfi-
guration/LTA for TAC Vista setup
till samma som i
LTA for TAC Vista.
(SE):
Option för kommunikation med
TAC Vista 3.21 - 3.33
(GB):
Optional communication with
TAC Vista 3.21 - 3.33
(GB):
LonTalk Adapter for TAC Vista
1 Install the program
LTA for TAC Vista
in the same direc-
tory as TAC Vista (for example TAC 330).
2 Start the program
LTA for TAC Vista
.
• Select a
TACLON interface
•
ADD
• Enter the
IP adress
of the intended TAC Xenta 511
• Select
Port
(default 1068)
•
UPDATE
•
EXIT
3 Connect to the TAC Xenta 511.
4 Select the
LDV Server Port
(default 1068) under
Con-
figuration/LTA for TAC Vista setup
and use the same
value as in
LTA for TAC Vista.
(GB):
Assigning the IP address
Enter
user name and password
.
1 Type
setip
(see figure on prev. page) and
then answer the DHCP enable question:
- no
if you are using a fixed IP address.
Continue with 2a.
- yes
if you are using dynamic
IP addressing. Continue with 2b.
3
2aEnter the IP items from the
previous page:
• IP address
• Subnet mask
2bEnter the remaining items
from the previous page:
• Default Gateway
• DNS
• Web site name
• Domain name
• Host name
3 Change
root password
(immedi-
ately, or later on with
passwd
).
4 Choose
restart
to
activate the new address.
5 Exit with
lo
(log out).