TabletTV Plus
User Guide
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page 13 of 33
NOTE: During the set-up process, the TabletTV app checks that the firmware in the Tuner is the
latest version. If a newer version is available, a message window appears telling you that the
firmware is being automatically updated.
To connect the Tuner to your tablet:
1.
Minimize the TabletTV Plus app.
2.
Open
Settings
on your tablet, and select Wi-Fi to display a list of available networks.
3.
Find your Tuner network on the list. Your Tuner name is TabletTV followed by six
alphanumeric characters, for instance TabletTVxxxxxx. These six characters are the last six
characters of the MAC address on the underside of your Tuner. (Be sure to write down this
information for future reference, since the label will fade over time.)
4.
Select your Tuner as the Wi-Fi source, as shown below:
5.
When the connection has been established, close Settings and return to (maximize) the
TabletTV Plus app.
6.
Press Next to open the “Select a Tuner from the list” pop-up window: