Instruc on
Manual
Version
0
304
2014
4
Operation:
WARNING!
Never leave the appliance unattended while
it is in operation.
NOTE
DO NOT PREHEAT EMPTY COOKWARE. The advantages of
induction cooking are speed and efficiency of the distribution of
heat. There is no need for pre-heating.
OPERATING THE DEVICE:
NOTE
The Power Levels range from 1-20 (P symbol).
The Temperature ranges from 140-440°F (°F symbol) increments
of 20.
1.
Before plugging in the unit, be sure that you are using
induction ready cookware and you have already placed the
food inside the cookware. Place the cookware on the center of
the cooking surface - an error code will appear if you do not do
so.
2.
Insert the plug into a suitable socket. You will hear acoustic
signals. The LED Display Panel will read, “8888” and then will
automatically switch to
Standby Mode
.
3.
Rotate the ON/OFF knob to turn on the unit (the knob will click
when the unit is ON). A short acoustic signal will notify you that
the unit is ON.
4.
Select the desired Temperature or Power Level (based on the
Mode that you have chosen) by rotating the ON/OFF knob.
The Control Lamp will indicate which mode is in use.
5.
ALWAYS
remember to turn the unit OFF and unplug when not
in use!
6.
Do
NOT
put empty cookware on the cooking surface or leave
the cookware on the surface too long.
WARNING
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside
of the unit. Liquid inside the unit could cause an
electrical shock.
If liquid spills or boils over onto the unit, immediately unplug the unit and
remove cookware. Wipe up any liquid with a padded cloth.
Burn Hazard
Do not touch cookware, heating surface, food or
liquid while heating.
Hot foods and liquids can burn skin. Induction heating surfaces heat very
rapidly. Use caution when adding pre-heated oil, liquid or other food
already in the cookware.
1 = ON/OFF Knob - Rotating the ON/OFF knob clockwise increases the
temperature, while rotating the knob counterclockwise will decrease the
temperature (adjustable temperature: 140-440°F).
2 = POWER/TEMPERATURE button - Press to change the display panel from
power to temperature.
3 = LED Display Panel - This displays the power level, temperature, timer time
or error codes.
4 = CONTROL LAMP - Lights up to indicate which mode of adjustment is in
use (POWER/TEMPERATURE).
TableCraft Products
ERROR CODES:
E0
= There is no cookware on the cooking surface, or the
cookware is not induction ready. Unit will automatically turn
OFF.
E1
= The cookware is too hot and has overheated the
surface of the unit. In this case, unplug the unit and let it
cool down completely. When an error code of E2 is
displayed, the whole unit including the temperature con-
trols will be locked. After 20 minutes, the code will disap-
pear and the unit goes into
Standby Mode
.
E2
= The temperature sensors have overheated - surface
temperature is too high. The unit will stop heating and the
unit will cool itself down.
E3
= The automatic voltage protection has been activated.
This will happen if there is a voltage malfunction. As soon
as the current is stable, the error code will disappear and
the unit will resume normal functionality.
NOTE
For added precaution, if you receive error codes E1-E3,
unplug the unit immediately and let it cool down
completely.
