Drive Pin Type Holder (E140-19)
The E140-19 Drive Pin Holder is intended for
rigid, square specimens that do not have a
center-mounting hole. The specimen is adhered
to the holder with S-37 or S-37-1 mounting
sheets and opposing driving pins prevent it from
slipping while the test is being conducted.
NOTE:
An example where this holder may be useful
is for glass or ceramic tile, which may be difficult to
drill a center hole.
Figure 30
Figure 31
Threaded Ring Specimen Holder (E140-21)
The E140-21 Threaded Ring Specimen Holder
incorporates a clamp plate and flanged clamp
ring to test slightly warped, rigid specimens.
The ring is threaded to the body of the holder,
which securely clamps the outer edges of
specimens up to 137 mm
(5.375 inch)
diameter.
Figure 33
Figure 34
15
5135 / 5155 Operating Instructions ver 1.1
