11
BUTTONS
Power
Test
Save
Back
Press power button to turn on unit.
Turn on second BERT tester at other
end of cable if qualifying a cable. Unit
will remain on for 30 minutes after the
last button press or can be turned off
manually by a second button press.
Pressing the Test button
initiates testing of the
cable connected. If a
GigTest’s are at either
end of the cable, a test
can be initiated on either
tester, which becomes the
master for that test run
and displays the results.
Remote end shows last test
run by that tester.
Press the Save button to save the
currently displayed test result.
Saving will be indicated by a quick
fl ash of all three green results LEDs .
Only 40 results can be saved.
If the Save button is pressed when
memory is full, all three red results
LEDs will fl ash. The saved results must
be cleared; press and hold the Save
button to clear all the results.
To view all results, refer to Wifi
reporting (page 12). Tests are
numbered from 1 to 40.
Pressing the Save button for more
than 3 seconds clears all saved
test results.
All three green results LEDs will fl ash
three times.
A test in progress can be
canceled by pressing the
back button, returning the
tester to idle. Only the
master can terminate a test
in progress utilizing two
GigTests testers.
