TPF / TFB Series Floor Scale Service Manual
- 5 -
4. INSTALLATION
4.1 Unpacking
Floor is relatively heavy. Always use a suitable lifting device and technics to lifit it
out of the packaging or to transport it to the required installation site.
Do not step under the suspended load, risky of injury.
When you received the goods, inspect it to make sure that it is not damaged and
accessories according to the customer’s order.
Remove all components from their packing material.
Keep the shipping container and packing material for future use.
Check the packing list.
Collect all necessary installation manuals for the equipment and
accessories.
Open the equipment and perform an inspection.
4.2 Installation
Accurate weighing results require a floor scale with perfect horizontal alignment.
During initial installation and after each change of work area it is necessary to
level the floor scale.
Select a location that is flat, solid, level and full supports the weight of
platform with full capacity load.
Use a forklift or other lifting means, along with chains,
Cables or nylon straps to remove the scale from the crate bottom.
Set the scale so that the interface cable exits in a direction where it can be
protected.
Placing the floor scale with access ramps or foot plates
Select place the floor scale
Place the floor scale correctly on the marked area of the floor scale.
Adjustable foot area wants to observe the evenness and level alignment
If any minor height difference, want to adjust adjustable foot for to
compensate level.
Connect the scale cable to the proper to the indicator.
