T Scale ROW Precision Balance Series, Техническое руководство

Страница: 6 / 30

ROW Precision Balance Technical Manual
- 6 -
3. INSTALLATION
Unpacking
When you receive the balance, inspect it to make sure that it is not damaged and
that all are parts are included:
 Remove the Indicator from the carton.
 Remove the protective covering. Store the packaging and to use if you
need to transport the scale later.
 Inspect the indicator for damage.
 Make sure all components are included.
1. Balance
2. Adaptor
3. Manual
Installation
 Place the balance on a table or connect with proper stand.
 Connect the plat form load cell cable in to the indicator load cell connecter.
Load cell connecter is locating back side of the balance.
 Connect the adaptor pin in to the indicator adaptor jack.
Adaptor jack is locating, back side of the balance.
 Adaptor connects into your AC power socket.
Pluggable equipment must be installed near an easily accessible socket
outlet with a protective ground/ earth contact.
 Turn on the On/Off key. If you want to turn off, press the key again.
 Display will be show the scale capacity and will be starting self-checking.
 After self-checking, display will be come to normal weighing mode.
 Warm-up time of 15 minutes stabilizes the measured values after
switching on.
 Calibrate with exact calibration weights, minimum 1/3 of the scale capacity
want to use for calibration. For calibration see details in parameter.
Then you can start your operation