T Scale JW, Руководство по эксплуатации

Страница: 4 / 6

JW weighing scales operation manual
REV: C1, June 2012
JW weighing scales operation manual
M+
To store current weight into the memory
SMPL
To select parts counting,
If not in weighing mode, it will return to weighing mode
U.WT
To select to set samples manually
HI LIMIT
To set high limit
LOW LIMIT
To set low limit
C
To clear the incorrect entries
0 to 9
Numeric Keys, to enter the values manually
Display
-2-
Saved Data
By pressing M+ key, number of weighing process followed by the total
weight will be displayed for three seconds.
Deleting saved data
By pressing M+ key, during the no of weighing displayed press
SMPL key to clear the memory
Automatic Accumulation
This function is used to automatically add weighing values to the
memory and to get a print out , if printer is connected.

Place the load on the platform

After stable indicator displayed, will be hear a beep sound.

Remove the load from the platform.

The weighing value will be stored into the memory and display will
be show
ACC 1
, followed by the weighing value.

Then display will be come to normal weighing.

The balance should be return to zero or a negative value before
another sample can be stored.

It can continue the process; It may take up to 99 entries or up to
the capacity of the display.
4. CALIBRATION
Normal Calibration
Turn on the scale and press TARE key during the self test.. Display will be
shown
” p Cal ”.

Press ZERO to confirm
, display will be show “
Unld
”

Remove all weight from the platform.
-7-
Display
Description
STABLE Indicate when the scale get stable
ZERO Indicate when the scale in Zero
NET Indicate when the scale in Net mode.
GROSS Indicate when the scale in Gross mode
Kg / g/ lb / oz Indicate when the scale in unit
M+ Indicate when the scale in accumulation
pcs Indicate when the scale in counting
%
Indicate when the scale in percent
Indicate when the battery charge is getting low
HI / OK / LOW Indicate when the load above ( HI ), load below ( LO ) and
with in the limits ( OK ) in check weighing mode.