Grand Central Hub
User’s Manual
Page 6 of 8
3 GENERAL USE
3.1 TO START UP & SHUT DOWN
GCHub should be left on.
3.2 TO GENERATE QUICKCODE FOR ONE DEVICE
1.
Turn on and unlock phone device
2.
Connect device to either USB port
3.
If Android,
a.
Enable USB debug
4.
If iOS
a.
Accept trust prompt
5.
GCHub will return barcode and QC and IMEI
6.
When completed, disconnect device
3.3 TO GENERATE QUICKCODE FOR TWO DEVICES
1.
Turn on and unlock both devices
2.
Connect one device to either USB port
3.
Connect other device to other port
4.
Enable USB/Trust
5.
First device connected will show on top of screen
6.
Second device connected will show on bottom of screen
4 TROUBLESHOOTING
4.1 COMMON ERRORS
1.
“Unauthorized device” on screen
a.
Trust device/enable USB debugging
2.
Connected device does not start
a.
Ensure the device has enough charge to turn on and the screen is unlocked prior to
connecting. The Hub will charge a connected device.
3.
“?” is displayed on Hub screen
a.
Unplug the device and plug in again to try the communication again
4.2 POTENTIAL REMEDIES
These instructions will be made available via T-Community.
1.
Power cycle the GCHub -- This should fix most issues
a.
Unplug the power cable from the device for 5 seconds.
b.
Plug the cable back in and wait for the Couple to reboot. This may take a few minutes. You will
need to go through the Authorization process again
–
see section 2.3.2.
2.
If it still is not working, check the following symptoms:
Содержание Grand Central
Страница 1: ...Grand Central Hub User s Manual...