Translation of the Original Operating Instructions
4
5.2 Connecting the pool robot to the switch box:
Unscrew the protective cap of the cable connection on the switch box and connect the cable connection of the
pool robot (Fig. 3, 1). Then tighten this clockwise (Fig. 3, 2).
Please make sure that you unscrew the cable connection and put the protective cap back on the connection when
dismantling or wintering. The device must then be stored in a dry and frost-free place.
Fig. 3, 1
Fig. 3, 2
5.3 Starting the device:
Carefully and slowly lower the cleaner into the pool using the handle. Make sure that the cleaner is always insert-
ed with its underside facing the pool wall and that it is also removed this way subsequently.
Set the ON/OFF toggle switch of the switch box (Fig. 3, 1) to ON ( I ). The LED display of the currently selected
mode now lights up in red - that of the Start/Stop button in green. It is now possible to choose between two oper-
ating modes, depending on the pool size and degree of contamination.
Fig. 4
Possible operating modes:
( I )
Quick clean:
Quick cleaning, duration: 1 hour, for smaller or lightly soiled pools
( II )
Intensive clean: Long cleaning, duration: 1.5 hrs, for larger or more heavily soiled pools
(RUN) Start / Stop:
This is used to start or stop the device
12
