GB
10
USAGE AS POND CLEANER
• Be sure that switch is in off position
(0) OFF
and
connect the machine to a suitable socket.
• Place the machine near the pond/lake keeping
safety distance of 2 mt from the border.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Place the drainpipe
(C)
in the correct direction
where the full tank will be discharged from
waste water previously vacuumed.
• Check that the drainpipe is lowered so that the
water drains off and avoid that the machine and
electric cable get wet .
• Insert the suitable filters for the proper use.
• Immerge extension hoses
(M)
with the pond
cleaner nozzle
(O)
in the water, reacing the
bottom of the pond/lake.
• Put switch
(B)
on
(–) AUTOMATIC
position in
order to start the machine.
• The machine starts working approximately
10 sec. later to allow the operator to join the
working position.
• After a working cycle of about 50 sec. the
machine switches off automatically for 20 sec.
to allow draining of the tank.
• When draining cycle is finished the machine
starts automatically.
•
In case of tank filling before 50 sec. During
vacuum phase, the internal gauge of the motor
head stops the vacuum function. Leave the
machine working.
• The waste water vacuumed is collected from
filter
(D)
situated in the final part of the drainpipe
(C)
.
• Be sure that draining filter
(D)
do not prevent
the flow of the water. Otherwise clean it.
• When job is over, switch off
(0) OFF
and keep
away the plug from the socket.
• Drain waste water from the tank and clean the
accessories before storing the machine.
USAGE AS
“WET & DRY VACUUM CLEANER”
• Be sure that the switch is placed in position
(0)
OFF
and connect the machine to a suitable
socket.
• Insert the proper filter suitable for the requested
usage.
• Put the stopper
(F)
on the tank
(I)
.
• Use the most suitable accessories for the
requested usage.
• Place the switch
(B)
on
(=) MANUAL
position to
start the machine.
•
When the switch is placed on
(=) MANUAL
position, the machine works continously, without
on/off cycles.
max
1,5 mt