T.I.P. 30306, Руководство по эксплуатации

Страница: 25 / 93

9
running water. Leave the pump and its components immersed in vinegar or lemon juice in case of
coarse dirt or limescale. Then assemble the rotor in the rotor chamber. Assemble the front cover onto
the pump.
The motor is completely encased with epoxy resin and protected from overheating and does not need
any maintenance.
8.3 Store
In case the appliance is not used for a long time store it in a dry place. Clean it as described above
and let it dry carefully. In case of frost the residual water can cause serious damage. Store it in a dry
and frost protected place.
8.4. Remedy of Faults
In the case of faulty operation first check if any error or other problems have occurred during
installation and which are not due to faults of the unit, such as for example power failure.
In the following charts we indicate some remedies of possible faults with probable causes and give our
advice for a solution. Please only implement any suggestions after disconnecting the unit from the
power supply. If a fault cannot be repaired refer to customer service immediately, or to the shop where
the item was purchased. The guarantee does not cover cases of damages which may result from
tampering and negligence.