T-Home Comfort Pro, Руководство пользователя

Страница: 45 / 52

43
Remote-Controlled Functions Systematic Telephony
Remote-Programmable Call Forwarding
Configuring the function
Z
(reserved call no.)
Wait until the connection to the
communications system has been
established. You hear a positive
acknowledgement tone.
Z
(system PIN)
*
Z
(your internal call no.)
*
(external access code, e.g.
0
)
Z
(destination no.)
#
Deleting the function
Z
(reserved tel. no.)
Wait until the connection to the
communications system has been
established. You hear a positive
acknowledgement tone.
Z
(system PIN)
*
Z
(your internal tel. no.)
#
Using the call number reserved in the Comfort Pro for remote
control, you can configure or delete immediate call forwarding for
your own call number from a remote location. This remotely-
programmed forwarding overwrites any other internally active for-
warding. Forwarding “On Busy“ and “After Delay“ are not affected.
Incorrect or non-existent call numbers are rejected. Your authori-
sation is checked in the same way as for forwarding within the
Comfort Pro. A correct entry is confirmed with a positive acknow-
ledgement signal, and the external call subsequently ended.
N
Note: The procedure will be aborted if there is a pause of longer than 60 seconds be-
tween the entry of two digits. Thanks to this time span, it is also possible to implement
remote-controlled functions from GSM cellphones.