20
TROUBLE
POSSIBLE REASONS
SOLUTION
Cannot open the lid
after steam released.
• The float is still up.
• In certain rare cases
after your appliance
has depressurised,
the float valve may
remain in the high
position meaning that
the lid cannot be
opened.
• In this case, allow your
appliance to cool off
completely so as to be
sure that there is no
more pressure inside it.
The amount of time it
takes for your
appliance to cool off
depends on the
quantity of food that
has been cooking
inside it.
• Only then should you
gently turn the float
valve using tongs.
Make sure you keep
your face well away
from the handle.
Air is escaping from the
rim of the lid.
• No sealing gasket.
• Food stuck in sealing
gasket.
• Sealing gasket needs
to be replaced.
• Lid not locked
properly.
• Install the sealing
gasket.
• Clean the sealing
gasket.
• Replace the sealing
gasket.
• Lock the lid again.
Steam is released from
the float valve.
• Food stuck in the
sealing gasket of the
float valve.
• The sealing gasket on
the float is damaged.
• Clean the sealing
gasket.
• Replace the sealing
gasket.
• Change the sealing
gasket every two
years.
• Check that the sealing
gasket is perfectly
cleaned.
The float doesn’t rise,
meaning the unit will
not go under pressure.
• The pressure limit
valve is not positioned
properly.
• Not enough food and
water in the cooking
pot.
• Steam is released from
the rim of the lid and
the pressure limit
valve.
• Position the valve to
.
• Put more food and
water in the cooking
pot.
• Send the product to
our service center for
repair.
If the pressure cooker still does not work, please call our consumer service center.
Содержание EMERIL
