T-Fal Ecomaster FV1732, Руководство пользователя

Страница: 18 / 51

15
IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Water is leaking
from the holes in
the soleplate. You are using the steam when
the iron is not hot enough. Wait for the indicator light to turn
off.
You are using the iron on eco
with steam control on max
position . See the chapter on “Adjusting the
temperature and steam”
You are using the turbo steam
trigger (turbo steam) too often. Wait a few seconds between each
use.
You have stored the iron
horizontally without emptying
the water tank or setting the
steam control to . See the chapter on “Storing your
iron”.
The iron leaks
at the start of
ironing. You have removed the anti-calc
valve to fill up your iron. Do not remove the anti-calc valve
when filling the iron.
The steam control dial is not
set to when filling the water
tank. Ensure that the steam control dial
is set to when filling the water
tank.
A brown
discharge
coming from
the soleplate
is staining the
clothing. You are using chemical
descaling agents. Do not introduce a descaling agent
into the water tank.
You are not using the right type
of water. Clean the steam chamber and see
the chapter on “What water should
I use?”.
Clothing fibres are building up
in the holes of the soleplate
and burning. Clean the steam chamber and the
soleplate with a damp sponge.
Periodically vacuum the holes in
the soleplate.
The soleplate is
dirty or brown
and may stain
clothing. You are using starch. Clean the soleplate as indicated
above. Spray the starch on the
reverse side of the clothing to be
ironed.
Your laundry has not been
rinsed sufficiently or you are
ironing a new item of clothing
before washing it. Ensure that your laundry is
sufficiently rinsed to eliminate
potential soap deposits or chemical
products on new items of clothing.