22
Firmware and Playback SW Update
1.
After removing the SD Card from the unit, install the SD card slot on the computer.
2.
If your computer doesn’t have SD card slot, connect first a memory card reader to the USB
port on your computer.
3.
After accessing the site (
http://www.joutec.com
) and download the related firmware or
playback software as there may have been important changes made since the time your
unit was manufactured.
4.
After downloading the update file, copy it to the update directory on the SD Card. (If
update directory folder is not present in the SD Card, create a new folder and change the
folder name as ‘update’. Then, try to copy it again.)
5.
After downloading the Playback SW file, copy it to the player directory on the SD Card
6.
After installing the SD Card on the body and connecting the power, update automatically
starts.
Caution
Do not remove the cigarette lighter plug or interrupt power to the unit or stop the
engine during update.
Note
For further information, access the website (http://www.joute.com) or contact your
retailer
