Diagram of the Overall DSL Connection in the case
of an ISDN Line
12
13
2. Connect the socket – the line-in jack freed
on the NT (in point 1) with the splitter port
labelled
PHONE
using the enclosed cable
(both connectors identical – RJ 11).
3. Proceed with the third bullet point of the
preceding procedure.
If your telephone socket is unsuitable (if it
has a different connector – see figure on
page 9) and the connecting cable cannot be
pulled out or if your NT has a line-in jack that
cannot be freed, contact the Fault Reporting
Centre 12129.
Legend to an unsuitable NT:
1. cable – connection to the power network
2. cable – line-in jack (fixed)
3. ISDN-out jack
230 V
Your telephone
cable
Cable with identical
RJ 11 connectors
Cable with
identical RJ 11
connectors
Telephone
socket
Your NT
(Network termination)
Splitter
Glitel GT–318RI
DSL modem
Your ISDN
telephone set
Network
adapter
> Self-Installation Guide
> Glitel GT–318RI DSL modem
1.
2.
3.
Unsuitable NT
