T+A S10, Руководство пользователя

Страница: 35 / 48

35
      
(Loudspeaker terminals)
The
S10
is equipped with four high-quality
WBT 0705-nextgen- loudspeaker terminals. Notes on
wiring for the S10 can be found in the Technical
Summary, in the chapter entitled ‘Back panel
connections’, and in the wiring diagrams in the Appendix.
The output stages are designed to cope with a minimum
load of 2
Ω
but continuous operation at very high volume
produces high currents in the power output stages which
can lead to overheating. This in turn trips the protective
circuit which switches the amplifier off automatically.
It is important to ensure that the terminal clamps are
firmly screwed down, and that no short-circuits can occur
through wire "whiskers" at the terminals.
A selection of excellent cable is available as accessories
matching to the

units. Please ask your

specialist dealer.
Note:
If the loudspeakers are to be used in countries outside
the EU the red/black stoppers can be removed from the
loudspeaker terminals. The speakers can then be
connected using banana plugs.
The stoppers are simply a push-fit in the terminals, and
can be prised out from the rear using a suitable tool such
as a pliers.