T+A S10, Руководство пользователя, Страница: 34 / 48

34
Back panel connections
INPUT
(Audio signal inputs)
Input (unbalanced)
Unbalanced amplifier input with an input sensitivity of
1 V
eff
.
The phono socket is connected to the output socket on
the pre-amplifier (s. Appendix A 2 ).
Balanced I (3-pin)
(symmetrical signal inputs)
Input for pre-amplifiers with symmetrical output. The
XLR socket
is connected to the pre-amplifier’s XLR
output socket.
Balanced II (4-pin)
(symmetrical signal inputs)
Pre-amplifier input with symmetrical output and trigger
voltage on pin 4.
The 4-pin XLR socket must be connected to the pre-
amplifier’s 4-pin XLR output socket (see Appendix
A 1 ).
The

accessory range includes special XLR cables
with 4-pin plugs and a control wire for the trigger signal.

Note
:
The S10 is equipped with three variants of
input socket (Cinch, XLR symmetrical 3-pin,
XLR symmetrical 4-pin). When connecting
equipment only one variant may be selected at
any one time. The inputs not used must be left
vacant.
R
LINK
Control input / output for

R
LINK
systems:
Both sockets are equivalent – one is used as input, the
other one serves as output towards other R
LINK
devices.
Mains input
This socket is for mains.
For correct connections refer to the sections
'
INSTALLATION AND WIRING
' and '
SAFETY NOTES
' .