T+A PA 1100 E, Руководство пользователя

Страница: 47 / 52

Disable and enable sources
You can disable unused sources to make source selection more convenient. Once deactivated, these
sources are not selectable via the source selection buttons on the device and the corresponding source
selection buttons on the FM11 remote control.
You can disable a source as follows:
• First select the source you want to disable.
• The selected source can now be deactivated by a long press on the button.
• After the source is deactivated, the corresponding source LED glows dimly.
Now the deactivated source cannot be selected via the source selection buttons directly on the PA1100 E
or the corresponding source selection buttons on the FM11 remote control.
To enable a disabled source, proceed as follows:
• Select the deactivated source using the source selection rocker on the FM11 remote control.
• Activate the selected source by briefly pressing the button on the FM11 remote control.
• After the source is enabled again, the corresponding source LED will glow in normal brightness.
j
Deactivated sources can be selected at any time using the FM11‘s source selection rocker.
Deactivated sources are indicated by the dimmed source LED.
47