12
Remote Control
General Information
All the
MP 1000 E’s
mechanism control functions and auxiliary functions can be operated using the remote control
system.
In general terms the remote control buttons have the same function as the corresponding buttons on
the
MP 1000 E’s front panel.
The infra-red sensor for the remote control system is located in the display area of the
MP 1000 E.
There must be clear line-of-sight contact between the
SRC1
handset and the screen. The following tables
show the remote control buttons and their general functions when operating the machine.
(red)
Switches the
MP 1000 E
on and off
Direct source select buttons
Selects the SCL function (e.g. access to music servers or
similar) or the USB DAC function (playback from a connected
computer), or selects the USB Media function (connected
USB memory media) of the streaming client.
Press this button repeatedly until the desired source
appears on the screen.
MP 1000 E’s
CD function
A brief press on this button selects the digital input you wish to
use.
Press the button repeatedly until the desired input is
displayed on the screen.
Selects
FM, DAB, or Internet
radio as source.
Press this
button repeatedly until the desired source appears on the
screen.
Selects
Bluetooth
as source.
If a
PA 1000 E
is connected to the
MP 1000E
(via E2-LINK),
repeatedly pressing this button selects the desired listening
source at the amplifier.
abc
...
xyz
Direct alpha-numeric input, e.g. track number, fast favourite
select, radio station.
The
and
buttons are also used for non-
standard characters.
During text input you can switch between numeric and alpha-
numeric input, and between capitals and lower case by
pressing the
button.
(yellow)
Switches sound on and off (MUTING)
-
+
(yellow)
Reduces / increases headphones volume. Performs the same
function as the corresponding buttons on the
MP 1000 E’s
front panel
. With installed pre-module (option) the volume
of the pre outputs is controlled too.
A brief press opens the tone control menu.
The menu points are called up using the
/
buttons, and can be changed using the
/
buttons.
ONLY with installed Preamplifier module!
Opens the setup menu for the source device just selected.
(Not all sources have their own Setup menu.)
Opens the ‘
System configuration’
menu.
(for details see Chapter
‘Basic settings of the MP 1000 E’
)
