T+A K 6 CV, Руководство пользователя

Страница: 55 / 64

55 Setting up
Typical wiring diagram: adjacent room operation
The
K6
can provide sound in an adjacent room.
The K6 is set up in the main room ( Room A ), i.e. the
room in which the speakers connected to loudspeaker
output
    A are located.
The adjacent room (
Room B
) houses the speakers
which are connected to loudspeaker output     B . If you
wish to control the K6 from the adjacent room by remote
control, you need to install an E 2000 remote control
receiver (optional accessory) in Room B, and connect it
to the
RC IN
remote control input socket on the
K6
.
You now need to access the ' Loudspeaker Menu ' and
set the
split
mode for volume in the menu point
Vol-
ume A/B . This makes it possible to alter the volume in
the adjacent room only ; in the main room you can only
alter the volume in that room .
A TV set in the adjacent room can also be connected to
an unused Monitor/TV output socket.
To simplify the cabling, or as a superior solution if the
route to the TV set in the adjacent room is very long, it is
possible to transmit the TV signal using an RF modulator
and a 75
Ω
cable, or by a radio system. Please ask your
specialist     dealer for details.