T+A FD 100, Руководство пользователя

Страница: 25 / 36

25
Settings
Introduction All the basic settings and connection settings of the FD 100 are
adjusted in the remote control handset’s System Configuration
menu; this menu is described in detail in the following section.
Screen Sectors of the FD 100 screen used for the System Menu
      
The name of the current menu is shown here.

 

 

The selected menu point is highlighted.
   
The “+” symbol indicates that an additional sub-menu is
present.

 

 

Menu point display: indicates which menu point is selected,
e.g. menu point 1 of
a total of 14.
      
Displays the time of day as currently set.
      
Battery symbol: indicates the state of charge of the integral
rechargeable battery.
      
Displays the link (connection) status.
Operating the System
Menu
•
Locate the
   
button on the remote control handset and
hold it pressed in to call up the menu. To close the menu you
may need to press the
   
button repeatedly.
•
The remote control handset’s System Menu now appears on
the integral screen.
•
Use the
   
/
   
buttons to select a point within the
menu.
•
Press the

 

button to call up a selected menu point.
•
You can now change the menu entry using the
   
/
   
buttons.
•
Press the

 

button to accept a changed value.
•
It is possible to interrupt the process at any time by pressing
the
   
button; this abandons the process
without
accepting any altered values.