T+A Criterion TAL XW, Руководство пользователя

Страница: 21 / 36

21
Connecting the sub-woofer to a surround decoder
Wiring diagram 3
Switch / adjustor settings
No. Purpose
No
control
voltage
Control
voltage
present
   
Automatic power-on
AUTO
AUTO

 

Control signal

 

CTRL
   
Filter OFF
OFF
The settings of the switches / adjustors     ,     ,     and
    can be changed as required.
The Cinch lead carrying the SUB OUT signal from the
surround decoder is connected to one of the sub-
woofer’s
CINCH IN sockets     .
Since the SUB OUT signal is filtered in the decoder, the
Filter switch

 

must be set to the ‘ OFF ’ position.
Use without control voltage:
The automatic power-on circuit is triggered by the
SUB OUT signal.
Use with control voltage (optional):
If the surround decoder features a control voltage output,
this control voltage is passed to the
DIN IN socket     via
an adaptor lead. This triggers the automatic power-on
circuit.
The  DD 1210 R and DD 1510 R surround decoders
supply a control voltage at the 5.1 OUTPUT socket.
Connecting the sub-woofer to the     K6 DVD
surround receiver
Wiring diagram 4
Switch / adjustor settings
No. Purpose
Control voltage
present
   
Automatic power-on AUTO
   
Control signal
CTRL

 

Filter OFF
The settings of the switches / adjustors     ,     ,     and

 
 can be changed as required.
The sub-woofer output signal ( SUBW ) from the K6 is
passed to the DIN-IN socket

 

on the K6 via the AKS6
adaptor and the SC
LINK
lead.
Since the SUBW signal is filtered in the K6 , the Filter
switch

 

must be set to the ‘ OFF ’ position.
The control signal is present at the CONTROL socket of
the K6 . It reaches the DIN IN socket     by the same
route, and triggers the automatic power-on circuit.