13
Menu point
Comfort standby
(Stand-by mode)
The
features two stand-by modes: ECO Standby with reduced stand-by
current drain, and Comfort Standby with additional functions, but slightly higher
current drain. You can select your preferred stand-by mode in this menu point:
Off (ECO Standby): Active functions in ECO Standby mode: can only be
switched on by remote control
On (Comfort-Standby): The following expanded functions are available: Alarm-
timer, clock display and the automatic power on function for one of the
analogue- or digital-inputs (A1 IN, A2 IN, D1 IN, D2 IN or D3 IN).
Menu point
Language
In this menu point it is possible to determine the language which is to be used
for the displays on the integral screen on the front panel of the
.
The language used for any transferred data, e.g. from an iPod or an Internet
radio station, is determined by the device itself or the radio station, and
therefore
cannot
be selected on the
.
Menu point
System / Update
At this menu point you will find seldom needed functions such as software
updates, regional setting for the tuner, activation of optional special functions,
and reset of default settings.
Sub-point
Update
At this menu point you can check the software version of the individual sub-
assemblies / modules by pressing the
/
buttons. It is also
possible to initiate the update process via USB or LAN (Internet).
For detailed information about updating the software please visit our
Homepage
www.ta-hifi.com
> Support > Hardware/Software.
Sub-point
Reset all for region
At this menu point you can adjust the radio de-emphasis for your particular
region.
Sub-point
Factory settings
Here you can reset the machine to its original state, i.e. when it was delivered.
All settings are reset, and stored favourites etc. are erased.
Sub-point
Code
At this menu point activated functions such as gapless playback (GPL ok) are
displayed. If you obtain a code to activate any optional special functions, it can
be entered here.
Network Settings
The method of using this menu and its settings are described in detail in the Chapter Installation / Using the system for
the first time, Network configuration.
