SZILBZ H18+, Инструкция по установке и эксплуатации

Страница: 8 / 12

- The extension usb cable can be used for charging. It can not be used for digital
connection.
- Re-pair: If the blue LED keep flashing, It means the touchpad needs to be paired
with usb-receiver. As for how to pair, please try the following steps:
- Step1: Pull out the usb receiver and then press “Left Mouse button” and
“Volume up button” at the same time and hold them, then turn on the touchpad.
The left 2 LEDs keep flashing means the touchpad has been in pair status.
- Step2: Insert the usb receiver into your main device’s usb port and put the
remote closer to the receiver within 20cm. The blue LED will be off in 1s which
Please Note
remote closer to the receiver within 20cm. The blue LED will be off in 1s which
means the pairing succeeds. If it fails for the first time, you could repeat Step1-2
again. Please keep the keyboard full power before pairing.
-
About signal interference : specialling for android TV box and smart TV. Large size
monitor device always has some signal do not work as well . When you press
a, ”AAAAA …” will appear. In this case you can use the a extension cable to solve
it. Please plug USB receiver to the available port, then pair and use remote
keyboard.