SZILBZ H18+, Инструкция по установке и эксплуатации

Страница: 7 / 12

Indicators
Red :
- It blink in low voltage and be on in charging status
- It will be off when the battery is fully charged.
Blue:
- It keeps on when key or touchpad is pressed and be off after finger released.
- It will flash when the wireless part is not work correctly. Please make sure your
usb receiver has been plugged into host side or you must re-pair it again.
Orange (left): It keeps on means the touchpad is in keyboard mode.
Orange (Right): It keeps on means the touchpad is in touch mode.
Note: When the 2 orange LEDs are on at the same time means the touchpad is in
exclusive gesture status.
Power Saving
- For power saving, the touchpad will enter into sleep mode when there is no any
operation in 3 minutes or there is wirelss disnnection in 10 seconds.
- Press any button to wake it up. Make sure the switch is on “
▼
” side.
- For further power saving, you had better switch the power off. (The USB receiver
does not need to be pulled out from the terminal. You can use it next time directly.)