FEATURES
1. IEEE802.3/ 802.3u/ 802.3x
2. Support auto negotiation speed, F/H duplex mode, and auto send
data control
3. Plug-and-play , auto MDI/MDI-X connection
4. Store and Forward 100M, Switching Process Type
5. Broadcast storm protection
6. Network work state LED indicator
7. 12
～
48VDC power input Operating temperature ranges from -40
to 75°C
8. Dustproof, rugged industrial design, IP30 protection
PANEL LAYOUT
SSIES-5P series industry Ethernet switches provide 5 TP ports.
10/100BaseT(X) ETHERNET PORTS
IES205 series have 5 10/100BaseT(X) Ethernet ports(RJ45). The pin
out of RJ45 port display as below, connect by UTP or STP. The
maximum distance is 100m. 100Mbps is used 100
Ω
of UTP5 , 10Mbps
is used 100
Ω
of UTP 3,4,5.
RJ 45 port support automatic MDI/MDI-X operation. can connect the
PC, Server, Converter and HUB .Pin 1,2,3,6 Corresponding connection
in MDI. 1
→
3,2
→
6,3
→
1,6
→
2 are used as cross wiring in the MDI-X port
of Converter and HUB. . 10Base-T/100Base-TX are used in MDI/MDI-X,
the definition of Pins are in below table.
NO. MDI
signal
MDI-X
signal
1 TX+ RX+
2 TX- RX-
3 RX+ TX+
6 RX- TX-
4,5,7,
8
—
—
Note: “TX
±
”transmit data
±
, “RX
±
”receive data
±
, “
—
”not use
DIMENSIONS
（
mm
）
POWER SUPPLY CONNECTION
Top view Front view
SSIES-5P series Ethernet Switch has 3-terminal block for power
input(V-,FG,V+), V-, V+ for 12VDC~36VDC power input, FG for
connecting device earth.
INSTALLATION
Before installation, confirm that the work environment meets the
installation requirements, including the power supply and space and
environmental conditions. Avoid in the sunshine, keep away from the
extensive heat or the area where in intense EMI.
DIN-RAIL INSTALLATION
SSIES-5P series can be installed to 35mm DIN-Rail, as follows:
1. Check the DIN-Rail Clip is fitted firmly and 35mm DIN-rail is fitted
firmly.
2. Insert the top of the DIN-Rail into the slot just below the stiff metal
spring. The DIN-Rail clip will insert into place as shown below.
WIRING REQUIREMENTS
Be sure to disconnect the power cable before installing and/or wiring
your Ethernet Switch. Calculate the maximum possible current in each
power wire and common wire. Observe local electrical regulations
Power Input (bottom)
Top Panel
Front Panel
1
8
