Sysvideo SNK RAID series, Руководство администратора

Страница: 33 / 74

33
drop-down list near the Destination Address parameter.
 If the device is not listed, select the Enter an IP address option and enter the IP address of the
device in the text box below this option.
3. Specify the Number of Tests and Timeout Threshold parameters.
4. Click Start Test .
Under Test Results , you can query test results.
4.10 Miscellaneous
DHCP
The Dynamic Host Configuration Protocol (DHCP) is based on the Bootstrap Protocol (BOOTP), which
provides the framework for passing configuration information to hosts on a TCP/IP network. The DHCP
adds the capability to automatically allocate reusable network addresses and configuration options to
Internet hosts.
To enable the DHCP technique, choose Main Menu > Network > System Ports > DHCP .
Retransmission upon Packet Loss
The Retransmission upon Packet Loss technique periodically checks whether the NVR receives all
packets transmitted from an encoder or decoder.
Upon detecting packet loss, the technique sends a retransmission request to the packet transmitter.
To enable the technique, Main Menu > Network > System Ports > Retransmission upon Packet
Loss , as shown in the following figure.