Sysvideo SNK RAID series, Руководство администратора

Страница: 28 / 74

For cameras located in a different NAT-enabled network from the NVR, select Located in Another
NAT-enabled Network and configure NAT forwarding port numbers according to onsite conditions.
5. (Optional) Enable the Universal Plug and Play (UPnP) technology.
1) On the NAT dialog box, select Enable UPnP , as shown in the following figure.
2) Select a UPnP mode.
 If you choose the auto mode, no further operations are required.
 If you choose the manual mode, double-click HTTP , NVR Station Communication , MNC
Communication , and MNC View to configure mapping ports.
6. Click Save .
7. Connect a router to the NVR using a LAN port on the router.
8. Configure the network settings of the router.
When the NAT technique is enabled, the NVR can be reached using the IP address of the WAN port on
the router.
If the UPnP technology does not take effect, perform the following steps:
1. Check whether the NVR connects to the Internet.
 If yes, go to the next step.