6
7
Press and hold the key on the
device remote control until the
Learning Remote Control makes a
sound.
Repeat the procedure from step
3 until all keys are learnt for the
selected device.
If you want to learn codes for
another device then wait for
approximately 30 seconds (all of
the device selection LED’s will be
blinking) then repeat the procedure
from step 1.
To exit Learning Mode press and
hold the ‘Standby’ and ‘OK’
keys for approximately 5 seconds.
NOTE If you hear a short alarm
sound from the Learning Remote
Control then this indicates that
there was a problem while learning
the code from the device remote
control.
• Release the button on the device
remote control.
• Alter the distance between the
Learning Remote Control and the
device remote control.
• Depress the same button on the
device remote control as before.
