PC
+
–
First, wire up the REX 300 with a supply voltage
of 10-30 VDC.
Note:
If you wish to use the myREX24, please read the
notes on the final page (PTO).
By default the REX 300 uses a static IP address
(IP: 192.168.0.100, subnet mask: 255.255.255.0).
Note:
First check with your network administrator that
this address is compatible with your network and that it
is available for use.
If the IP address of your PC needs to be changed in
order to reach the Webinterface of the REX300, carry
out steps A to C next. (See overleaf)
Connect the LAN interface of your computer to the
LAN interface of the REX 300. Use a crossover cable for
this connection between your PC and the REX 300.
Start a browser (Internet Explorer, Opera, Firefox, ...)
and enter the IP address of the router in the address
field.
In order to register with the REX 300, enter the follow-
ing data:
username: helmholz
password: router
Note:
For security reasons, the password of the router
should be changed as soon as the router is configured;
this also applies to the “root” user.
1.
2.
3.
4.
5.
