uLory User Guide
13
Command Instruction
Command for basic setup
COMMAND
DEFAULT (RANGE)
DESCRIPTION
AT&Z
-
Restart the device
AT&F
-
Initialize all settings and show
the initial value on the screen
AT&V
-
Show the current setting
AT&H or ?
-
Show the list of commands
AT&E
-
Shows the current AES KEY, AES
IV. However, the initial AES KEY
and AES IV values are not
shown. Only the changed AES
KEY and AES IV values are
shown.
AT+PTYPE=<Mode>
1(0~1)
0 = LoryNet Mode
1 = General Communication
Mode
0: Setting for connection and
communication with LoryNet
platform
1: Default value of setting for
General Data Communication
AT+PTP
1(0~1)
0 = OFF (LoryNet Table
Communication)
1 = ON (Peer to Peer)
0: Setting for LoryNet Table
Communication
1: Default value of setting for
General Data Communication
AT+DID=
<Destination ID>
16777214(1~16777215)
(16777215 is a Broadcast ID)
Enter the ID of the device to
communicate with
