SystemBase uCAN View, Английская инструкция

Страница: 5 / 29

5
uCAN View
1. uCAN View
1.1.
Introduction
The uCAN View is an Microsoft Windows based analyzer for uCAN device to probe all
transmitted data in the CAN bus.

It does not require a separate driver to operate.

The users can see all the CAN data from the provided utility.

The CAN data can be saved into DCU (Data CAN Unit) file and read from it.

With the timestamp feature, the users can check the time when the CAN data was
received.

Provides ‘Exerciser’ function that creates CAN frame and sends to other CAN
device.

Provides ‘Error Status’ to detect errors in CAN bus.

Provides ‘Advanced Function’ for setting numbers of widely used baud rate.

Supports ABOR (Automatic Bus-Off Recovery) and ART (Automatic Retransmission)
modes
1.2.
uCAN
uCAN is a device which connects to the USB port on the IBM compatible computer and
CAN bus by D-sub 9 pin port. It has a USB type A and DE-09P (male) for the CAN interface.
The image and the pin out of the product are as follows.