Portbase User Guide
2.
View commands
z
set view [ all / nw / serial / admin ]
-
set view all :
View all current settings.
-
set view nw :
View current network settings.
-
set view serial :
View current serial port settings.
-
set view admin :
View current admin settings.
3.
Network commands
Configure general network environment and network management.
z
set nw [ mode / ip / subnet / gateway / dns / nms ] <var … >
[ Network Configuration ]
-
set nw mode [ static / dhcp ]
(Default: static )
IP obtaining method for Portbase’s network connection
-
set nw ip <IP Address>
(Default:
192.168.1.71)
Set the current IP address Portbase is assigned to.
When line type is Static IP, manually enter an appropriate IP address.
When line type is DHCP, it is not editable.
-
set nw subnet <Subnet mask>
(Default: 255.255.255.0)
Set the subnet mask Portbase is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, it is not editable.
-
set nw gateway <Gateway address>
(Default:
192.168.1.1)
Set the default gateway Portbase is assigned to.
When line type is Static IP, manually enter an appropriate gateway.
When line type is DHCP, it is not editable.
-
set nw dns<DNS address>
Set the DNS address of Portbase.
36
ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
36/45
